Compiling Programs

All high-level language code must be converted into a form the computer understands. In the above shell scripts, this translation is handled by the shell itself. Unfortunately, such interpreted languages that must act on each command one-at-a-time typically run much slower than a computer processor is able.

Alternately, a compiled program is one in which a separate program is used to translate the full set of human-readable commands into an executable, and in so doing is able to optimize how these commands are performed. This translation process is handled by a compiler, which will typically perform a suite of optimizations including grouping repeated calculations together into vector operations, pre-fetching data from main memory before it is required by the program, or even re-ordering commands to maximize data reuse within fast cache memory.

For example, C++ language source code is converted into an executable through the following process. The human-readable source code is translated into a lower-level assembly language. This assembly language code is then converted into object files which are fragments of code which the computer processor understands directly. The final stage the compiler performs involves linking the object code to code libraries which contain built-in system functions. After this linking stage, the compiler outputs an executable program.

To do all these steps by hand is complicated and beyond the capability of the ordinary user. A number of utilities and tools have been developed for programmers and end-users to simplify these steps.

A single session of a week-long workshop is an insufficient amount of time to teach any compiled programming languages, so we’ll primarily discuss how to use codes that you’ve written within a Linux environment, and provide some links on tutorial pages for two of most popular/advanced languages (C++ and Fortran90) for modern high performance computing (HPC).

Compiling Programs

First copy the shared example code to your own directory:

cp -R /hpc/examples/workshops/hpc/compiling_tutorial .

In the compiling_tutorial directory, you will notice a number of files:

$ cd compiling_tutorial
$ ls
Makefile         hello.c    hello.f  hello.cpp  hello.f90

These implement the archetypal “Hello world” program in a variety of languages prevalent within HPC:

  • hello.c – written in the C programming language

  • hello.cpp – written in the C++ programming language

  • hello.f – written in the Fortran-77 programming language

  • hello.f90 – written in the Fortran-90 programming language

Open the file written in your preferred programming language. If you have no preference among these, open the C++ version:

$ gedit hello.cpp &

Depending on your language of choice, you should see something similar to the following:

// Inclusions
#include <iostream>

// Example "hello world" routine
int main() {

  // print message to stdout
  std::cout << "Hello World!\n";

  return 0;

For those of you familiar to the “Windows” (and even OS X’s “Xcode”) approach to programming, you’re probably more used to seeing this within an Integrated Desktop Environment (IDE), where you enter your code and click icons that will handle compilation and execution of your program for you. While IDEs exist in the Linux world, they are rarely used in HPC since the compilation approach on your laptop typically cannot create code that will execute on the worker nodes of a cluster.

So with portability in mind, let’s investigate the (rather simple) world of command-line compilation in Linux.

The first step in compilation is knowing which compiler to use. Nearly every Linux system is installed with the GNU compiler collection, GCC:

  • gcc – the GNU C compiler

  • g++ – the GNU C++ compiler

  • gfortran – the GNU Fortran compiler (handles F77/F90/F95/F2003)

However, if you have a very old version of the GNU compiler suite, instead of gfortran you may have g77, that only works with F77 code (not F90 or newer).

The GNU compiler suite is open-source (i.e., you can modify it if you want), free, and is available for all major computer architectures (even Windows); however, it does not always produce the most efficient code. As a result, the SMU Center for Scientific Computation has purchased the PGI compiler suite:

  • pgcc - the PGI C compiler

  • pgc++ - the PGI C++ compiler

  • pgfortran - the PGI Fortran compiler (handles F77/F90/F95/F2003)

To compile an executable, we merely call the relevant compiler, followed by the files we wish to compile, e.g., for the C code we’d use

$ gcc hello.c

or for the F77 code we’d use

$ gfortran hello.f

Either of these commands will produce a new file named a.out. This is the standard output name for executables produced by compilers. However, since a computer where every program was named “a.out” would be unusable, it is typical to give your your program a somewhat more descriptive name. This is handled with the command line option -o, e.g.,

$ g++ hello.cpp -o hello.exe

Compile the program in the language of your choice, naming the executable hello.exe. Once this has been compiled, you can run it just like any other Linux program, via

$ ./hello.exe

The extension on executable files in Linux can be anything; I just choose “.exe” to provide a sense of familiarity for those coming from the Windows world. In fact, all that actually matters for a Linux program is that it has “execute” permissions (and that it was compiled correctly). You can verify that the files generated by the compiler have the correct permissions via

$ ls -l hello.exe
-rwxr-xr-x 1 rkalescky math 8166 May 29 12:26 hello.exe

The three “x” characters in the string at the left of the line states state that the program may be executed by the owner (rkalescky), the group (math), and others (anyone on the system), respectively. If you recall changing the permissions of and, you used chmod to set these same “x”es manually; the compiler automatically does this for you in the compilation stage.

Alternately, you can inquire about any file’s properties with the file command:

$ file hello.exe
hello.exe: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.18, not stripped

Note the ‘executable’ property listed above.

For those who would like additional information on learning computing languages, I’d recommend that you pursue some of the following links, and look through some of the provided code for this workshop (especially in some of the following sessions). The best ways to learn a new language are through following examples and practicing; if you’d like some programming “homework” for practice, ask me after class. Also, Google is a great resource if you’re ever in trouble when programming, since the odds are good that someone else has had the same questions as you, which have been answered on public forums. Just describe your question and do a web search.

Fortran resources:

C++ resources:

Compiling “typical” Linux Packages

As the number of UNIX variants increased, it became harder to write programs which would be portable to all variants. Developers frequently did not have access to every system, and the characteristics of some systems changed from version to version. The GNU configure and build system simplifies the building of programs distributed as source code. All programs are built using a simple, standardized, two step process. The program builder need not install any special tools in order to build the program.

The configure shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses those values to create a Makefile in each directory of the package.

For packages that use this approach, the simplest way to compile a package is:

  1. cd to the directory containing the package’s source code.

  2. Type ./configure to configure the package for your system.

  3. Type make to compile the package.

  4. Optionally, type make check to run any self-tests that come with the package.

  5. Type make install to install the programs and any data files and documentation.

  6. Optionally, type make clean to remove the program binaries and object files from the source code directory.

The configure utility supports a wide variety of options. You can usually use the --help option to get a list of interesting options for a particular configure script.

The only generic option you are likely to use at first is the --prefix option. The directory named by this option will hold machine independent files such as documentation, data and configuration files.

Example: Compiling the Program “units”

For this example, we will download and compile a piece of free software that converts between different units of measurements.

Downloading Source Code

First create a download directory:

$ mkdir download

Download the software using wget into your new download directory (wget stands for “World Wide Web Get”, though apparently they thought that wwwget was too long to use):

$ cd download
$ wget
Extracting the Source Code

List the contents of your download directory:

$ ls

As you can see, the filename ends in tar.gz. The tar command turns several files and directories into one single “.tar” file. This is then compressed using the gzip command (to create a “.tar.gz” file).

First unzip the file using the gunzip command. This will create a .tar file:

$ gunzip units-1.74.tar.gz

Then extract the contents of the tar file:

$ tar -xvf units-1.74.tar

Alternatively, since tarred-and-zipped files are so prevalent (often called “tarballs”), these two commands may be combined together via

$ tar -zxvf units-1.74.tar.gz

All of us have unzipped a file, only to discover that whoever put it together zipped the files themselves instead of a folder of files. As a result, when we unzipped the files, they “exploded” into the current directory, hiding or even overwriting our existing files. This is colloquially referred to as a “tarbomb”. Do not do this. When making a zip file or tar file, be considerate of others and always put your files in a folder, then zip that new folder so that when unpacked, all contents are contained nicely in the sub-folder.

Again, list the contents of the directory, then go to the units-1.74 sub-directory:

$ ls -l
$ cd units-1.74
Configuring and Creating the Makefile

The first thing to do is carefully read the README and INSTALL text files (use the less command below). If the package author is doing her job correctly, this these files will contain important information on how to compile and run the software (if not, they may contain useless or outdated information). This package was put together by a responsible author.

$ less README

(use the arrow keys to scroll up/down; hit q to exit).

The units package uses the GNU configure system to compile the source code. We will need to specify the installation directory, since the default will be the main system area which you do not have write permissions for. We’ll plan on installing this into a new subdirectory in your home directory, $HOME/units-1.7.4. This is typically handled by passing the --prefix option to configure:

$ ./configure --prefix=$HOME/units-1.7.4

NOTE: The $HOME variable is an example of an environment variable. The value of $HOME is the path to your home directory. Type

$ echo $HOME

to show the value of this variable.

If configure has run correctly, it will have created a Makefile with all necessary options to compile the program. You can view the Makefile if you wish (use the less command), but do not edit the contents of this file unless you know what you are doing.

Building the Package

Now you can go ahead and build the package by running the make command:

$ make

After a short while (depending on the speed of the computer), the executable(s) and/or libraries will be created. For many packages, you can check to see whether everything compiled successfully by typing

$ make check

If everything is okay, you can now install the package:

$ make install

This will install the files into the ~/units-1.7.4 directory you created earlier.

Running the Software

Go back to the top of your home directory:

$ cd

You are now ready to run the software (assuming everything worked). Unlike most of the commands you have used so far, the new units executable is not in your PATH, so you cannot run it from your current directory like this (the following command will fail to run):

$ units

Instead, you must run executables that are not in your PATH by providing the pathname to the executable. One option for this is to provide the path name from your current location, e.g.,

$ ./units-1.7.4/bin/units

Alternately, you can navigate through the directory structure until you are in the same directory as the executable:

$ cd ~/units-1.7.4

If you list the contents of the units directory, you will see a number of subdirectories:




The binary executables


GNU info formatted documentation


Man pages


Shared data files

To run the program, change into the bin directory:

$ cd bin

and type

$ ./units

As an example, convert 6 feet to meters:

You have: 6 feet
You want: meters

        * 1.8288
        / 0.54680665

If you get the answer 1.8288, congratulations, it worked. Type ^c to exit the program.

To view what units the program can convert between, view the data file in the share directory (the list is quite comprehensive).

To read the full documentation, change into the info directory and type

$ info

Here, you can scroll around the page using the arrow keys, use [enter] to select a topic, or [n] to go to the next topic, [p] to go back to the previous topic, or [u] to go back to the main menu.

Once you’re finished reading up on the units command, press [q] to exit back to the command prompt.

If for some reason you don’t actually want such a critically important program installed in your home directory, you can delete it with the command:

$ rm -rf ~/units-1.7.4